Just wanted to share how to properly strap down loads. In the pictures below, you will see how I strap down my load on this trailer.
Everyone has their own way of doing things, but this is the proper way to secure a load like this one pictured. And I know many will say this is way overkill, but there is no such thing, when traveling down the hi-ways!!
I see so many with just 2 straps in loads like this, and that is just not acceptable!! What if one strap breaks? You cannot see it in these pictures, but the inner piece of equipment is on an inner pallet and separate from the outer frame sections. Therefore, it needs 4 corner strapped just as I have it.
On the frame sections, I have 4 ratchet straps down the side and one down the center. These ratchet straps are 2” and rated at 10,000# each. I also use heavy rated frame straps to hook into, and they all have protective sheathing around them for extra protection.
This load is tight and right, will not move, and is properly secured!! If you are securing loads less than what is pictured here, you are asking for trouble. NOTICE: On the frame sections, I have 2 ratchets on one side, and the other 2 on the opposite side. This allows for equal and proper tightening!
What if your load moves/shifts, or falls off? Maybe causes a wreck, or hurts others, or worse? It’s better to take the extra time, secure your load properly and keep everyone safe. Things happen, so why add to the what ifs. What if someone swerves in front of you, or slams on the brakes, or what if you were to have a blow out?
There are already enough idiots on the roads, don’t be one of them! learn how to properly strap down loads and keep yourself and others around you safe.
If you are unsure, ask for help. Watch YouTube videos, or look at these pictures and copy what I’m doing. This is not rocket science, it’s just common sense stuff!!
If you’re wanting to know how to load and properly secure your loaded trailer, then here is another post you may want to see. Flatbed trailer with machinery…Chains and boomers?
Always do your best,
-Mike Pilcher
MPE LLC
.
.
